Home
About us
Ypsilon
HRS
Brochures
Contact
Amadeus Audio

 

Harmonic Resolution Systems
Record Clamp
Nimbus Couplers
Damping Plates
HRS
HRS
HRS

M3 Platform

M3 Platform

The M3 Isolation base is our current reference level isolation solution. It significantly reduces the negative impact of structure-borne vibration on your audio component performance. It minimizes input vibration, provides significant levels of isolation, and properly controls residual energy.

This unique design utilizes six different materials to optimize stiffness, geometry, mass, and impedance characteristics.

Each material is carefully selected for optimum performance and functionality. The M3 Isolation Base also uses two different proprietary HRS elastomer formulations. The first was developed to maximize isolation efficiency, and the second was developed to control and eliminate residual energy.


A finely polished black granite contact plate is combined with two custom resonance control stages in a billet machined aircraft aluminum frame with a craftsmanship finish and black anodize coating. This exceptional design was created to offer maximum performance, cosmetic elegance, and a durable scratch resistant inlay design that will provide years of maintenance free service.

The M3 Isolation Base is produced in four standard sizes. Each size can be purchased in any of the three different load ranges to optimize component performance.

If one of standard sizes or load ranges does not fit your needs, HRS offers hundreds of custom designs for many different components including all large turntables and amplifiers. Please contact your local sales representative or Harmonic Resolution Systems for assistance with custom isolation bases for your components.
Broadband noise reduction system maximizes performance

Highly effective on wide range of surfaces and structures
Low profile compact design minimizes space requirements
Standard and custom sizes ensure full system integration
Integrates directly into HRS audio stands without modification (M3-1719, M3-1921 sizes)

Isolation Base Physical Characteristics (Standard Sizes)

Model
Number

Dimensions (W x D x H)
inches (cm)

Weight
lb (kg)


M3-2123


23 x 21 x 3
(58.4 x 53.3 x 7.6)


62 (28.1)


M3-1921


21 x 19 x 3
(53.3 x 48.3 x 7.6)


52 (23.5)


M3-1719


19 x 17 x 3
(48.3 x 43.2 x 7.6)


43 (19.5)


M3-1419


19 x 14 x 3
(48.3 x 35.6 x 7.6)


37 (16.8)


Isolation Base Load Ranges


Load Range

Supported Equipment Weight
lbs (kg)


RD (Red)


0-30lbs (0-14)


GRN (Green)


30-60lbs (13-27)


BL (Blue)


60-120lbs (27-54)


Note: HRS also offers a wide range of custom Isolation Base solutions for any component size or weight.

 

 
Tel: 07799812271 - E-mail: glyn@amadeus-audio.co.uk
 
1 Hoewood, Millglade, Small Dole, West Sussex