Home
About us
Ypsilon
HRS
Brochures
Contact
Amadeus Audio

 

Harmonic Resolution Systems
Record Clamp
Nimbus Couplers
Damping Plates
HRS
HRS
HRS

SXR
SXR-1921-3V with M3 Isolation Bases.

The SXR Audio Stand was developed based on technical concepts and technology derived from our reference level MXR Audio Stand frames. The SXR frame system combined with Harmonic Resolution Systems isolation bases eliminates noise revealing a new level of musical performance. The modular frame concept is manufactured from billet-machined aircraft aluminum with a resonance control system. The highly acclaimed HRS isolation bases load directly into the SXR frame as the shelf system. The SXR frame optimizes isolation base performance while offering unique flexibility and functionality. The SXR frame system is completely modular and can be expanded vertically or horizontally at any time. It is available in a 1 bay (amp stand) configuration up to an infinite number of bays for larger systems. The SXR Audio Stand can be reconfigured, expanded or contracted at any time by acquiring the additional parts of the system needed to make the desired changes.

The owner of the SXR system can also change the component spacing of any system. Standard shelf spacing can be specified at 6 inches, 8 inches, or 10 inches. This can also be changed in the future if the component size changes by ordering new strut lengths from your authorized Harmonic Resolution Systems sales agent.


Front view of SXR-1921-3V with M3 Isolation Bases.

Typical standard SXR frame configurations are shown below. This is a small sample of available configurations. Please consult your authorized HRS sales agent to determine the best configuration for your system needs. All dimensions below are for reference only and heights are based on 8” shelf spacing.

Model
Number

Dimensions
(W x H x D)
inches (cm)
*Height depends on shelf spacing but with 8" component spacing the approx. heights are:

Isolation Base Size
inch (cm)

Std. Number
of Isolation Bases


SXR-1921-1V


27.2 x 4.5 x 19
(69 x 11.4 x 48.3)


21w 19d
(53w 48d)


1


SXR-1921-2V


27.2 x 16.5 x 19
(69 x 42 x 48.3)


21w 19d
(53w 48d)


2


SXR-1921-3V


27.2 x 28.0 x 19
(69 x 71 x 48.3)


21w 19d
(53w 48d)


3


SXR-1921-4V


27.2 x 40.0 x 19
(69 x 101.6 x 48.3)


21w 19d
(53w 48d)


4

***For double wide configuration the width is approximately twice the single wide unit dimensions.

SXR

 

Model
Number

Dimensions
(W x H x D)
inches (cm)
*Height depends on shelf spacing but with 8" component spacing the approx. heights are:

Isolation Base Size
inch (cm)

Std. Number
of Isolation Bases


SXR-1719-1V


25.2 x 4.5 x 17
(64 x 11.4 x 43)


19w 17d
(48w 43d)


1


SXR-1719-2V


25.2 x 16.5 x 17
(64 x 42 x 43)


19w 17d
(48w 43d)


2


SXR-1719-3V


25.2 x 28.0 x 17
(64 x 71 x 43)


19w 17d
(48w 43d)


3


SXR-1719-4V


25.2 x 40.0 x 17
(64 x 101.6 x 43)


19w 17d
(48w 43d)


4

***For double wide configuration the width is  twice the single wide unit dimensions.


Double SXR
Front view of SXR-1921-3V Double Wide with M3 Isolation Bases.

The SXR Audio Stand comes standard in black anodized aluminum finish. The standard SXR frame sizes are designed around the 21” wide by 19” deep isolation bases and 19” wide x 17” deep isolation bases. Harmonic Resolution Systems also builds SXR frame systems for 23” wide by 19” deep on custom order basis. An unlimited number of configurations can be specified for the SXR Audio Stand. Please contact your local HRS sales agent or HRS for more information.
Fully adjustable shelf system (quantity and location)
Load range of each shelf optimized for maximum performance
Leveling system with locking feature for stability
Infinite cable access (no vertical or horizontal beams)
Structure design for optimum isolation base performance
Unlimited expandability preserves initial investment
Design for use with HRS M3 and S1 isolation bases


The SXR frame system contains two high frequency billet machined primary braces that support each shelf. The support braces vertical spacing is established based on the specified support structure length. Length can be specified for 6 inches, 8 inches, or 10 inches of usable shelf space at time of order. The shelf spacing can be changed in the future by changing the support structure length. Regardless of the final shelf location you still will have infinite cable access because there are no front or rear braces to the main structure. You can also add or remove a shelf by adding or removing the required structural elements. The SXR is a very high performance system in a flexible, innovative, and cost effective design.

Amp SXR

 

SXR

 

 
Tel: 07799812271 - E-mail: glyn@amadeus-audio.co.uk
 
1 Hoewood, Millglade, Small Dole, West Sussex